For caulking around sinks, tubs, showers and horizontal and vertical surfaces meet. Also adheres bath fixtures and loose tile. Do not use to install grab bars. Maximum joint width and depth should not exceed 1/4" (6 mm). Do not use in areas with constant water exposure. For joint up to ¼” (6mm) wide and deep.
Polyblend Ceramic Tile Caulk, Sanded, 10.5 oz Capacity, Cartridge, 15 g/l VOC, 7 - 9 pH, Liquid, NO 122 Linen, 24 ft Linear at 1/4 in Bead Coverage, 30 Min Drying Time, 5 hr Setting, 24 hr Functional Cure, Mild Acrylic Odor/Scent, >200 Deg F Flash Point, Media: Powder, Water Spray, Foam, Carbon Dioxide, Composition: Calcium Carbonate, Silica, Crystalline, Quartz, 1,2-Propylene Glycol, Titanium Dioxide, Hydrotreated Heavy Naphtha (Petroleum), Carbon Black, 1.5 - 1.7 Specific Gravity, >50 Deg F Application, Application Method: Standard Caulking Gun, Siliconized Acrylic Latex Base, 900 psi Tensile, 4650 psi Compressive Strength, Resists: Strain and Crack, Standards: WHMIS/OSHA, ANSI A118.6, For Caulking Around Sinks, Tubs, Showers and Where Tile Meets Tile or Another Surface and For Interior Applications